Print error in the manuals?

[mrgud]

I don't know if some one noticed this, but, I recently have been putting the time belt on after some work on the car. I had to pot the engine in "the fase" (cranckshaft TDC and camshafts pullys on the marks... bla bla...)

page 233 in the manuals, picture EM 4432

Notice that on the picture the crankshaft pulley is on the 5deg mark, not on the 0 as it should be. I believe that is a print error...

The crankshaft must be at 0 with 1st cil piston in top ded center, and the camshafts must be closed (it should be spark time, actualy some after the spark because the spark should fire 10deg before TDC). Also that is the position where the distributor goes in "on the mark" as it says in the manual.



Also I wanted to ask...

What do the
AT
AW
and AE
mean?? It is driving me nuts... I have some electric problems and there are 3 shemes for AE, AT and AW... What do they stand for?? Models or markets, or what... How do I know which one to look at?

[S.K.]

A = A-engine

E = Corolla
W = MR2
T = Carina / Celica / Corona

[Ivan141]

AE = AE86 corolla
AW = AW11 mr2
AT = dunno..but it's a 4age celica

[mrgud]

tanx

[banpei]

Ivan141 Wrote:AE = AE86 corolla
AW = AW11 mr2
AT = dunno..but it's a 4age celica

Carina and Celica shared the same floorpan, so AT should also be about the 3A Celica (if there ever was one).

I'll have a look at it tonight and compare it with my own (paper) manual.