Robokill 1984 Levin Coupe 8A9 // building new engine

[robokill]

First piece of the project is in.....

20v Silvertop throttle bodies. (need to adapt them)

I still need to clean up the house so that I can take the interior out of the car...

[banpei]

Are you going to put the throttle bodies on a 16v?

[Apolan]

oh, nice project, please let us know what needs to be done and how.

[robokill]

Jup banpei I will install 20v silvertop itb's on a bigport 7 ribbed 16v 4age
:-)

already found a problem.

As for the itb's of a 20v have a difrent fuel rail i need to use the one from the 16v (logic) But the injectors of a 20v are difrent than from a 16v. So I am scouting for a bunch of injectors (295cc or more) (less than 355)

I will start with low tuning just a pair of simple camshafts and itb's later I want to build a head that can go over 9mm lift.

[Mux213]

Last night we spend some time working on my Volvo and on Robokill's second white hachi.

This car proved to be more and more mystery. It has some bad rust spots in expected places but other then that is scarely rust and damage free.

I also made some video but for some reason the last bit of video I made didn't record properly so I only have some footage of robo's Panda hachi.
I'll post that later.. For now, pics!!

[Mux213]

And some more..

[Mux213]

We also swapped the rimms with the car from ThePrez, So the Prez now has the wheels that where under the white hachi..

[DJexor]

jammer dat ik zaterdag een verjaardagsfeestje had... had er graag bij willen zijn. Heb die witte van je nog niet gezien! Jullie zitten er binnenkort vast nog wel een keertje?

[TE71corolla]

len,ik krijg nog iets van jou

[banpei]

Nice progress!
On what places did you find unexpected rust then? I only see rust in the usual places