News in Gunma area coming from Czech - Hachi for sale

[Spitfire]

Imho the most beautiful 86 in Czech rep!!!!

[Onyx]

No konecne ses taky ozval. Uz jsem si rikal, ze je Ti to snad uplne putna ;-). Jsem rad, ze se Ti libi. Bohuzel jak jsem psal, nejezdi jak by mela.

[Spitfire]

Onyx Wrote:No konecne ses taky ozval. Uz jsem si rikal, ze je Ti to snad uplne putna ;-). Jsem rad, ze se Ti libi. Bohuzel jak jsem psal, nejezdi jak by mela.

Prubezne sem ziskaval info od Stana A taky mi povidal co se deje, dovedu si predstavit jak te to muselo srat Ale hlavni je ze kastle je uz udelana, podvozkove to mas taky hotovy takze uz jen staci seridit motor a vsechno bude ok. Porad lepsi vonava hachi se spatnym motorem nez zrezla hachi s dobrym motorem imho Ja sem se uz taky mel konecne rozhoupat, predevcirem bylo na planu vest moji do servisu na udelani spojky ale kluk se kterym sem byl dohodnutej na odvoz nemoh a neslo to ani vcera ani dneska budu rad kdyz to bude pristi tejden ale prestavam tomu verit....
Kdyz uz sme u toho, musim tady udelat trochu reklamu. Vypomaham kamaradovy s jeho eshopem kterej tedko rozjel a je tam i par veci na 86tku, takze jestli mas zajem treba o D2 camberplates, nejaky vejfuky/svody nebo o cokoliv jinyho tak se ozvi link je v podpisu

[Bubble_Drift]

Car is in a very good condition. Nice choice on the wheels too.
BUT! Please lower it quite a bit!! :wink:

[robokill]

car looks good! if you nead a head then try to find a ae92 last type engine will help in performance as well

[Apolan]

wow, looks amazing. Thats my favourite color scheeme.

[Onyx]

Indeed colour looks amazing. I didn`t expect anything special, but I am glad I didn`t go for white/black panda, even Sekiguchi was pushing.. ;-).

To Robokill: Will the AE92 head exactly match? No problem in swap?

To Bubble Drift: You are right, man. It still seems quite high. For the moment I like it a lot. Especially since the driving is (was) so great. But any proposals for future?

Here are some other pics:
http://moje.auto.cz/Onyx/hachina.html

[NoHachi]

Problem in swap: you need a smallport head inc plenum/runners. Then you have to cut and reweld the plenum so the throttlebody faces forward

[Ryo]

Jo kara je fakt pekna uz aby som aj ja zacal na tom pracovat ale vyzera to ze este bude nejaky cas v garazi a prejde len docasnou konzervaciou hrdze co sa medzicasom objavili.

[robokill]

nohachi is right. But its a simple task to most. done a zillion times. Check internet for most comming conversions