AEU86 Shop

[Mux213]

Apolan, hope we can get them on the market soon, but we really need to put the camber plates through their paces first

Sutter, I don't want to commit to prices yet, I'm still debating with Jamie. We still need to find a shipping solution that will bring the cost per unit down a little and Jamie is looking into changing the way he makes certain parts.

As for NCRCAs, not sure about those yet, RCA+camber plate is more flexible but indeed a more expensive option.

[Mux213]

Hey everyone,

They were in a little while ago but me being home as a new father I didn't have the time to pick them up *shame*.

Anyways we've restocked on Mintex brakes so they are available again. 1193-1144 (front) and 1320-normal (rear) are available. I also have a single set of 1198-1144 (rear) but have yet to test the fitment. If they fit we'll see if there is enough request for these, they will be 60 euro's a set.

We've also got some oil filters in. These are normal run of the mill oil filters but we got them for a nice price so, get them while they last for 5 euros a piece

Last but not least. I have a single set of front rotors in for test fitting. These are normal vented discs (not drilled, not grooved). Same applies here, if there is enough want for these, we'll stock them but please keep in mind these are heavy so shipping is more expensive then for other products. A set of front rotors will be 65 euros.
Rear rotors are still in back order but will be 40.00 euro's a set once we finally get them in.

[Mux213]

Okay another update.

We've reordered a few things on the shop site so go check it out A few new products that are announced.

First, we have a price for the camber plates. We'll be selling the Teins for 200 euros and the AEU86 plates for 150 euros. We should have a limited supply of the Teins in by the end of Juli, start of August along with a new batch of bushings.
The AEU86 camber plates are nearly ready, just some shipping things to figure out so they are expected early august as well.

We're also getting a couple of sets of AGX adjustable shocks in, prices for these to be announced soon.

Staying with suspension, we're now also able to supply APEX springs. We won't stock these (yet) as our supplier has informed us there is a delivery time of about a week for these. We're selling them for 145 Euros.
APEX springs are progressive lowering springs for the Hachi. A nice replacement over stock that gives you a nice sporty ride without sacrificing to much comfort.

[filh]

hello , any news about bushing restock?
Are they ordered ?
Thxs
Filh

[Mux213]

Hey Filh,

Yes they were ordered over a month ago and they've been sitting still in America ever since

We ordered a lot of other parts to ship along with the bushings including some shocks. Everything has been waiting on the shocks

I just got a mail this morning that after 22 days of continues herrassing the supplier, they finally decided to deliver the shocks so finally all the stuff that we've ordered will be shipped end of the week, but it will still take some time before everything arrives in Holland (overseas shipping), so we're now looking at restocking end of august.

Pretty bummed out by this, its a full months delay on parts we've already ran out of

[filh]

ok ,
Not always so easy to deal overseas..... I already experienced it .
Just let me know when bushings will be available and I'll order them to you (payment as you prefer Paypal or bank transfer )
And a big thanks for all you do for our passion
Filh

[Mux213]

Hey Filh,

Well its just ashame we have to keep people waiting, its more that we're still small and only can offer good prices if we bundle orders together. Then it only takes one supplier to mess things up a little.

Overseas dealing can be very messy but Sym and Maxwell are helping us great over there so so far its been a pretty pleasant business.

I'll make sure to put a set aside for you, I think I had already noted that down, so the minute they are in you'll know

[filh]

thanks a lot
Phil

[Mux213]

Today our first set of APEX springs arrived A second set we've ordered is expected next week dus to a small mixup at the warehouse.



Even though these springs are "Made in Holland" they take up to 5 working days after we order them so we'll probably be stocking a single set (unless people start ordering them in large quantities all of a sudden ) to get the delivery times up.

These springs lower the car about 3 to 4 cm and are roughly 20% more stiff then stock if I am not mistaken. I hope to be able to take pictures of these springs on a car some day soon and get some more exact data on the springs from our supplier.

We're also working on a deal to get KYB GR2 or Tokico Blue non adjustable shocks in. This may take a few months before we actually have them in house but together with the APEX springs they should be an excelent affordable direct swap solution for a sporty but comfy daily driver and perform nicely on the track aswell.

[Mux213]

As mentioned a couple of topics before, this all took a little while longer then we all expected. The boxes are packed and going onto the ship any day now and should be here in about a month. More things learned, more experience gained, I'm sure we'll be able to restock faster next time.

Theres some other stuff in here as well. We've got a couple of sets of AGX shocks, if you want one, be quick because only one set isn't reserved yet so these are almost sold out before we even have them in stock and it will take awhile before we can restock (the AGXs where the whole reason for the delay in the first place). The sets are 440 Euros (4 corners).

There is also a single 4.7 TRD RNP up for grabs for 500 euros though I'm tempted to keep this one for myself

We also have a couple of Tein camber plates on the way over, these are 200 Euros a set.

On the subject of camber plates, the AEU86 camber plates are ready as well and have been for a few weeks. We're having a little difficulty right now figuring out Bulgarian laws. As you may know Bulgaria became an EU country which should have made dealing with Bulgaria a whole lot easier. Unfortunately Bulgaria is having trouble letting go of old traditions (i.e. taxes) We're rounding off some final legal mombo jombo and with some luck Jamie will be able to send the plates to us in a week or two, so expect these to finally be available mid august as well!