AEU86 Shop

[jamiemirror]

At the moment these are available for VW Golf 2/3 and Nissans - RWD Bluey and S13 only. Preparing BMW version, if I get Carina with open hood for a minute here - no problem to extend with Carina RWD version

[Jezza_hr]

I've been meaning to post my experience with the mintex pads that I got from the shop. They are brilliant. Finally my handbrake is vicious enough to put my rear end out at low speed. Stopping distance is greatly improved also.

[Mux213]

Hey Jez,

Glad to hear they are working for you. Did you run into any problems with mounting the 1198's on the rear? The handbrake improvement sounds like they are worth the trouble. Thats an unexpected bonus

To everyone else, we got new stock of Mintex pads in today

[banpei]

jamiemirror Wrote:Preparing BMW version, if I get Carina with open hood for a minute here - no problem to extend with Carina RWD version

I expect the top mountings to be the same as AE86 since the rest of the strut is "about" the same.

[jamiemirror]

Why don't you check, banpei ? You can save me a lot of Carina RWD hunting

[banpei]

Makes a lot of sense to make camber on a 70hp automatic.

[Jezza_hr]

Mux213 Wrote:Hey Jez,

Glad to hear they are working for you. Did you run into any problems with mounting the 1198's on the rear? The handbrake improvement sounds like they are worth the trouble. Thats an unexpected bonus

To everyone else, we got new stock of Mintex pads in today

No problem at all. Just needed to grind off the front pads a little, rear pads were perfect fit.

[Mux213]

Jezza_hr Wrote:

Mux213 Wrote:Hey Jez,

Glad to hear they are working for you. Did you run into any problems with mounting the 1198's on the rear? The handbrake improvement sounds like they are worth the trouble. Thats an unexpected bonus

To everyone else, we got new stock of Mintex pads in today

No problem at all. Just needed to grind off the front pads a little, rear pads were perfect fit.

Thats great news!

OK MDB1198M1144 for the rears is a success then

[HybriD07]

Another question about the camber plates have you tried them on the agx and how much is shipping for the shocks and camber plates together?

I'm just reviewing my options

[Mux213]

Hi Hybri,

The shocks are roughty 9Kg, the camber plates 1.5Kg so you're just over 10Kg. That means 27.95 Euros

The shocks are 440 euros, the camber plates 150 euros. With the 15% discount we have until Christmas that means you get a 88.50 euro discount.

So that's:
27.95 + 440.00 + 150.00 - 88.50 = 529.45 Euros.

Owh, and I just tried the nuts for the camber plates, they fit like a glove on the AGXs!