Impreza Group-N project.
04-04-2008, 12:39 PM
Post: #111
Impreza Group-N project.
Thanks,

I'm working on them again as we speak, alot of work goes into them. Smile
Find all posts by this user
04-04-2008, 02:47 PM
Post: #112
Impreza Group-N project.
That stuff is great.
Can't wait to see this moving.

Speed Industries
Hurdnerwaeldlistr. 73
8808 Pfaeffikon
Switzerland
e-mail: [email protected]
phone: +4155 420 15 69
page: http://www.speed-industries.ch
MSN: [email protected]

We have all the parts your Hachi needs
Visit this user's website Find all posts by this user
04-04-2008, 04:43 PM
Post: #113
Impreza Group-N project.
Some pics of today's work.
I welded the holes on one body shut, also removed some material on the front and rear, I put both side by side to show the difference.

[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]
Find all posts by this user
04-05-2008, 02:13 PM
Post: #114
Impreza Group-N project.
Great progress, I really like this project a lot!

Some really skilled craftsmanship in this thread, Im curious on what the finished project will look like.

Haaatschi! - Gesundheit!
Visit this user's website Find all posts by this user
04-07-2008, 05:09 PM
Post: #115
Impreza Group-N project.
Thanks, I can't wait either. Big Grin

Today I kinda finished my body's, sandblasted them a bit etc.
Maybe I'll have the outside shotpeened, because the surface is "open" after sandblasting it, so dirt sticks to it very easily.


[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]
Find all posts by this user
04-07-2008, 05:33 PM
Post: #116
Impreza Group-N project.
Sweet. Respect!

You might want to give it a polish on the inside since you did all that work on it.

Speed Industries
Hurdnerwaeldlistr. 73
8808 Pfaeffikon
Switzerland
e-mail: [email protected]
phone: +4155 420 15 69
page: http://www.speed-industries.ch
MSN: [email protected]

We have all the parts your Hachi needs
Visit this user's website Find all posts by this user
04-28-2008, 08:24 PM
Post: #117
Impreza Group-N project.
No, it has to be a bit rough m8. Wink

Not much of an update but I am trying to get my car registered on the road which has a few glitches. Sad

Anyway, I got my turbo set-up this weekend, it is a Garrett GT30 kit by Perrin.

Here some shots of the set on the floor and in the car:


[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]
Find all posts by this user
05-02-2008, 12:30 AM
Post: #118
Impreza Group-N project.
Yesterday I picked up my new inlet and water manifold.

There are a few small glitches that I have to work out but it's 99% perfect fit.

As I'm switching the airco and steerpumps I need to make new brackets.
I though it was smart to get 2 identical brackets and then switch bottoms and tops with each other.
So I started with the steering pump, but it turned out to high, so I will start from scratch again.

Everything needs to be as low as possible on the engine, first because of the FMIC/radiator shrouding and because of the FMIC piping from the manifold that has to run over them.

The body's in their place:

[Image: AEU86 AE86 - Impreza Group-N project.]


Alien!!!!! Aarghh.... uhm, sorry.

[Image: AEU86 AE86 - Impreza Group-N project.]


Well finished!:

[Image: AEU86 AE86 - Impreza Group-N project.]


In it's place:

[Image: AEU86 AE86 - Impreza Group-N project.]

[Image: AEU86 AE86 - Impreza Group-N project.]


Look how neat the FMIC can go underneath:

[Image: AEU86 AE86 - Impreza Group-N project.]


Da original:

[Image: AEU86 AE86 - Impreza Group-N project.]


After some cutting:

[Image: AEU86 AE86 - Impreza Group-N project.]


Pump bracket remade:

[Image: AEU86 AE86 - Impreza Group-N project.]


Measuring:

[Image: AEU86 AE86 - Impreza Group-N project.]


Not that any of this matters as it's going in the bin anyway. Big Grin


Watermanifold, pitty it doesn't fit in one go:

[Image: AEU86 AE86 - Impreza Group-N project.]


All together:

[Image: AEU86 AE86 - Impreza Group-N project.]
Find all posts by this user
05-02-2008, 01:26 AM
Post: #119
Impreza Group-N project.
aram!!!! n1 going man! Thumbs up!

Cars:
"99 Lexus IS200
"86 AE86 Kouki Panda Levin GT-Apex (restore project)
"84 AE86 Zenki Blue Levin (project racer)
Motorcycles:
"02 Yamaha R1
"02 Honda Hornet S
"08 BMW R1200GS
Find all posts by this user
05-02-2008, 01:59 AM
Post: #120
Impreza Group-N project.
I see you received a package from Tracktive. Thumbs up!

Heard the manifold is some good stuff.

Speed Industries
Hurdnerwaeldlistr. 73
8808 Pfaeffikon
Switzerland
e-mail: [email protected]
phone: +4155 420 15 69
page: http://www.speed-industries.ch
MSN: [email protected]

We have all the parts your Hachi needs
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  1984 Celica turbo b-group restoration Roger 8 10,331 04-24-2010 05:09 PM
Last Post: corolla4agze

Forum Jump:


User(s) browsing this thread: 7 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication