4AGE 16v N/A project

[ZDoman]

I think you won't have any problems running your engine with 11,3-11,5:1 CR.
But be sure not to have your ignition more than 8-10degrees (set with the chenk engine "jumper" in) and you should buy as high octane fuel as you can.
Anyways, did you measure the CR with fluid or you just think that its 11,3-5??
I'm surprised about your engine runs so great with the stock ECU and that huge big cams!
But for sure you could run safer with 256/264 cams.

tolisspi Wrote: Happy new year
Im thinking to fit again the stock camshafts and the stock under bucjket shims, so the stock head. I decided something like this because i cant find and find an ecu standalone this moment.
BUT, ll my engine work fine with the stock ecu? The CR is 11,3/11,5:1.
Also im thinking to find some camshafts 256 or 264 with 7,9 lift. ll work the engine work fine with stock engine?
Thx a lot.