SK Sanyo/OER Sports Injetions Kit ITB

[eight-six]

Hi Matthew

Here is my set up



Here is the inlet plenum I have - 4 feeds for each inlet runner, 1 to go off to the Map sensor. You will also notice the small black 3 pronged valve - this provides vacuum for things like the FPR etc. Check your EFI stock inlet manifold - you should have one.



Oh also forgot you will also need a brake booster vacuum. If you look at this picture, the f2nd runner down next to the IAT sensor plug - there is a barbed hose end - this is for the brake booster.



Oh ignore the black hoses you see.

Quote:does your kit have an other MAP Sensor incl.? i have seen an old HKS ITB kit (see pic), which has an other MAP sensor incl.!

I am going to use the stock the map sensor, I intend to use Greddy Emanage / Dastek so it it should all work with the stock sensors etc.