Fensport 4age superchip

[totta Crolla]

Superchips I.C.O.N Race programming lead
Version francaise ici
I bought a car a while ago equipped with the Superchips ICON race programmable ignition module. Unfortunately is was not installed correctly due to wrong indications from the manufacturer.
As from then, i decided to look in depth as to how it works in order to install it correctly.
Here are the wire colours and where they should be connected :

Yellow and black dotted wire : Input 1

Orange and black dotted wire : Input 2 (for use with twin coiled ignition)

Yellow : Output Coil 1

Orange : Output Coil 2

Red : 12 volt power supply (switched)

Black : Ground

I was suspicious about the diameter of the output wires, however this is correct, the thicker black dotted wires are inputs.

Once the module wired up it is necessary to program the module to your needs.

To achieve this you will need the suited software (Download here) and