High Compression Ratio ----> Detonation

Threaded Mode | Linear Mode

High Compression Ratio ----> Detonation

03-24-2009, 11:27 AM

Post: #28

irishtwincam Offline

Member

Posts: 230
Joined: Oct 2005
Reputation: 0

111/111 is stock timing
some books put it to 110/110.
Much of a muchness.

As for the cam cards, there seems to be greatly differing numbers for basic cams like 256/264/272 between the sheets.

Also, some of them have hand written values that dont correspond to the "paintbrushed" values iin the corners.
One cam cards duration adds up to 288 and its labelled a 264 cam card?

Just take them with some caution.
If you can hunt down TRD numbers for the cam timing Id trust those Big Grin

But 106/116 seems to be about right.

http://www.skynet.ie/~eireae86

« Next Oldest | Next Newest »

Messages In This Thread

High Compression Ratio ----> Detonation - apardal - 10-12-2007, 10:46 AM

[] - dikolotour - 10-12-2007, 11:36 AM

[] - NoHachi - 10-12-2007, 01:51 PM

[] - apardal - 10-12-2007, 01:55 PM

[] - Eircamae86 - 10-12-2007, 03:11 PM

[] - NoHachi - 10-12-2007, 04:26 PM

[] - Ivan141 - 10-12-2007, 05:57 PM

[] - apardal - 10-12-2007, 09:44 PM

[] - oldeskewltoy - 10-12-2007, 10:33 PM

[] - NoHachi - 10-12-2007, 11:29 PM

[] - robokill - 10-12-2007, 11:43 PM

[] - oldeskewltoy - 10-13-2007, 01:24 AM

[] - apardal - 10-14-2007, 03:46 AM

[] - NoHachi - 10-14-2007, 10:05 AM

[] - apardal - 10-14-2007, 02:25 PM

[] - jamiemirror - 10-16-2007, 09:21 PM

[] - robokill - 10-16-2007, 09:44 PM

[] - Ivan141 - 10-16-2007, 10:17 PM

[] - Lipinhu - 10-16-2007, 11:11 PM

[] - apardal - 10-16-2007, 11:21 PM

[] - oldeskewltoy - 10-17-2007, 06:07 PM

[] - apardal - 10-17-2007, 08:00 PM

[] - apardal - 10-17-2007, 11:23 PM

[] - Uzelac - 03-23-2009, 05:35 PM

[] - irishtwincam - 03-23-2009, 05:50 PM

[] - oldeskewltoy - 03-23-2009, 10:25 PM

[] - jondee86 - 03-24-2009, 03:49 AM

[] - irishtwincam - 03-24-2009 11:27 AM

[] - totta Crolla - 03-24-2009, 11:20 PM

[] - totta Crolla - 03-24-2009, 11:26 PM

[] - GTRJazz - 03-26-2009, 12:57 AM

[] - jondee86 - 03-26-2009, 06:24 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	High-beam warning lamp	Mylesmck	4	1,431	07-21-2023 07:44 AM Last Post: banpei
	Engine stress at high speeds	gh0st	6	2,416	08-30-2022 07:11 PM Last Post: Power_uP
	82mm Stock compression Pistons	apardal	4	2,741	11-24-2021 04:26 PM Last Post: apardal
	4AGE 16V engine overheat when at high speed	chenfon	32	20,952	12-31-2020 06:39 AM Last Post: chenfon
	working out compression ratios	kazi	2	3,523	07-16-2019 08:22 PM Last Post: oldeskewltoy

User(s) browsing this thread: 5 Guest(s)