Spark plug wires
02-09-2005, 04:05 PM
Post: #3
 
Unless you are boosting, OEM is best. The rest is just throwing away perfectly good money at a set of sparkly cabels. It would be better spent somewhere else.

Correction, you're probably okay with OEM wires when boosting also. Problems start at around 1 bar boost, but even then, most of the times a stronger coil solves the problem, not the wires.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user


Messages In This Thread
Spark plug wires - ZaX - 02-09-2005, 03:16 PM
[] - Ivan141 - 02-09-2005, 03:46 PM
[] - NoHachi - 02-09-2005 04:05 PM
[] - ZaX - 02-09-2005, 04:53 PM
[] - NoHachi - 02-09-2005, 05:24 PM
[] - ZaX - 02-09-2005, 05:49 PM
[] - Herman - 02-10-2005, 12:59 AM
[] - alimonos - 02-10-2005, 01:10 AM
[] - dreja - 02-10-2005, 11:32 AM
[] - max_ae86 - 02-10-2005, 11:36 AM
[] - Kas - 02-10-2005, 11:41 AM
[] - max_ae86 - 02-22-2005, 03:33 PM
[] - SutteR - 10-03-2006, 10:03 PM
[] - jamiemirror - 10-04-2006, 08:56 AM
[] - SutteR - 10-04-2006, 09:01 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Ignition switch plug and wires Blaze0010 3 430 11-25-2024 12:29 PM
Last Post: Blaze0010
  4AGE cylinder head plug removal Ivan141 5 2,174 09-30-2023 09:47 PM
Last Post: Ivan141
  Plug ID kazi 6 6,469 02-17-2019 10:07 PM
Last Post: kazi
  Weak spark, doesn’t start. AlexFourTwenty 4 15,537 12-12-2017 03:35 AM
Last Post: AlexFourTwenty
  16v distributor hole plug harkes 8 9,602 10-12-2016 11:13 AM
Last Post: harkes

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication