cam lift to TRD valve
06-21-2010, 07:20 PM
Post: #5
 
I run 11m lift and the car is driveable on the street but its not a daily for sure.
Valves are not a problem. You need good lifters (the cheapest are on arrowprecision.co.uk) plus uprated springs and retainers. Other lifters are available from webcam, catcams, toda and 1SZFE but no gotta buy exact size. They run for ca.22Eur each.

IF Carlsberg made an AE86, then it would be propably the best car in the world...
Find all posts by this user


Messages In This Thread
cam lift to TRD valve - fluen - 06-21-2010, 05:09 PM
[] - corolla4agze - 06-21-2010, 06:26 PM
[] - Bean - 06-21-2010, 06:29 PM
[] - einneb - 06-21-2010, 06:37 PM
[] - woper - 06-21-2010 07:20 PM
[] - totta Crolla - 06-21-2010, 10:11 PM
[] - fluen - 06-22-2010, 10:15 PM
[] - robokill - 06-22-2010, 10:56 PM
[] - MartinS - 06-22-2010, 10:58 PM
[] - fluen - 06-23-2010, 12:00 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  4AGE Valve Buckets Scored Steller Engineering 2 895 10-06-2023 05:34 PM
Last Post: Steller Engineering
  20 Valve Blacktop smoking after engine flush - why? RolanTHUNDER 2 1,361 11-30-2022 12:09 PM
Last Post: RolanTHUNDER
  HKS valve springs totta Crolla 3 2,186 05-25-2022 10:24 PM
Last Post: oldeskewltoy
  Cam Cap Bolt Snapped!! Alex170984 1 3,698 06-08-2018 01:17 PM
Last Post: Ivan141
  HKS 260 8.0 Cam Card d3nso 5 6,923 02-14-2018 08:29 PM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 7 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication