|
help 4age wont rev!?!?
|
|
06-30-2010, 10:27 PM
Post: #15
|
|||
|
|||
|
The dilithium crystals are low Captain....
I don't know how the ECU monitors the MAP sensor to bring up a fault.
Again, from memory, there are three wires; an ECU ground reference, a 5V ECU input, and a variable signal output. If the ECU doesn't monitor the variable signal, then it might not throw a fault if the signal is missing ? If your spark and timing is good, then it can only be air or fuel that is in short supply. Either the injectors are not being told to squirt more fuel, or they are trying to squirt, but the fuel is not there (= fuel flow/pressure problem). Cheers... jondee86 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
help 4age wont rev!?!? - ep71 - 06-27-2010, 06:11 PM
[] - PatrickAE86 - 06-27-2010, 06:44 PM
Engine running backwards ?? - jondee86 - 06-28-2010, 10:21 PM
Smooth transitions are good :) - jondee86 - 06-29-2010, 02:33 AM
.... don't blow :) - jondee86 - 06-30-2010, 03:26 AM
The dilithium crystals are low Captain.... - jondee86 - 06-30-2010 10:27 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Raising the rev limit on stock ECU | fax0815 | 2 | 11,042 |
08-31-2015 02:04 PM Last Post: gon |
|
| 4age 16v oem ecu rev limiter research | ditn | 18 | 28,749 |
06-22-2015 08:02 AM Last Post: ditn |
|
| Start wont turn over after installing radio | MC_JP | 6 | 9,871 |
09-22-2014 11:13 PM Last Post: izanagi |
|
| High rev problem | stratosTRD | 6 | 9,733 |
07-03-2013 12:05 AM Last Post: jondee86 |
|
| Mikuni carb help just wont balance | megabob | 3 | 5,220 |
01-01-2013 10:32 PM Last Post: allencr |
|
User(s) browsing this thread: 2 Guest(s)