What camshafts would be nice?

Threaded Mode | Linear Mode

What camshafts would be nice?

08-19-2010, 12:47 PM

Post: #12

Project D Offline

Purist

Posts: 992
Joined: Dec 2006
Reputation: 0

PatrickAE86 Wrote:12.5 CR :o

i was thinking about 11.5 or so...?
was thinking about catcams (7105140)

intake 282° exhaust 275°
intake 10.5mm lift exhaust 10.0mm lift

Actualy CR make everything. That comparable to the turbo pressure.
More you have, more you make power, but too much and you broke your engine.

Tomei recommends 12:1 CR for their 264°/8.1mm camshaft (with great setup, ITB ans standalone ECU you can already go over 165hp with that kind of cam)

Going over 8mm lift meen not only change the lifters but also change the springs. (to avoid coil bind)
OEM, Toda (springs only) and I think HKS also are not made for cams over 8.5mm lift.

Also if you whant to keep your car "streetable" don't go over 280°, the power band is to high for daily driving...

For ME, the best setup for you would be something around 272° / 8mm lift and new pistons with higher CR.

PS: with ITB setup you need to be ready to spend over 2k€.

« Next Oldest | Next Newest »

Messages In This Thread

What camshafts would be nice? - PatrickAE86 - 08-16-2010, 06:44 PM

[] - robokill - 08-16-2010, 06:53 PM

[] - PatrickAE86 - 08-16-2010, 07:03 PM

[] - totta Crolla - 08-16-2010, 08:06 PM

[] - PatrickAE86 - 08-16-2010, 10:35 PM

[] - apardal - 08-16-2010, 10:49 PM

[] - BOOMEX - 08-19-2010, 03:49 AM

[] - PatrickAE86 - 08-19-2010, 10:46 AM

[] - waffenschmiede - 08-19-2010, 11:14 AM

[] - Uzelac - 08-19-2010, 12:00 PM

[] - BOOMEX - 08-19-2010, 12:39 PM

[] - Project D - 08-19-2010 12:47 PM

[] - BOOMEX - 08-19-2010, 12:54 PM

[] - Project D - 08-19-2010, 01:12 PM

[] - PatrickAE86 - 08-19-2010, 01:21 PM

[] - Project D - 08-19-2010, 02:01 PM

[] - robokill - 08-19-2010, 06:10 PM

[] - waffenschmiede - 08-19-2010, 07:59 PM

[] - Project D - 08-19-2010, 08:02 PM

[] - Bean - 08-19-2010, 08:34 PM

[] - Jan Pedersen - 08-19-2010, 09:08 PM

[] - apardal - 08-19-2010, 10:29 PM

[] - Project D - 08-19-2010, 11:17 PM

[] - robokill - 08-20-2010, 01:34 AM

[] - PatrickAE86 - 08-20-2010, 06:24 PM

[] - Bean - 08-21-2010, 04:13 PM

[] - Project D - 08-21-2010, 05:01 PM

[] - PatrickAE86 - 08-21-2010, 07:28 PM

[] - totta Crolla - 08-21-2010, 07:58 PM

[] - Bean - 08-22-2010, 12:41 PM

[] - PatrickAE86 - 08-22-2010, 02:31 PM

[] - harkes - 08-22-2010, 03:53 PM

[] - Bean - 08-22-2010, 04:01 PM

[] - Bean - 08-22-2010, 04:03 PM

[] - isac - 08-22-2010, 08:40 PM

[] - Project D - 08-22-2010, 09:13 PM

[] - Bean - 08-22-2010, 10:06 PM

[] - isac - 08-23-2010, 09:21 PM

[] - Bean - 08-23-2010, 10:15 PM

Re: What camshafts would be nice? - oldeskewltoy - 08-24-2010, 12:40 AM

Re: What camshafts would be nice? - Bean - 08-24-2010, 03:19 PM

[] - apardal - 08-25-2010, 12:00 AM

Re: What camshafts would be nice? - oldeskewltoy - 08-25-2010, 12:08 AM

[] - ZDoman - 08-25-2010, 12:46 PM

[] - Uzelac - 08-25-2010, 01:06 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	How would/have you rebuild your 4age?	joaotcgt	6	8,859	07-21-2015 10:40 AM Last Post: mad.matt
	4AGE camshafts (again)	Alex170984	26	29,202	03-19-2013 02:41 PM Last Post: Alex170984
	what clutch would you recommend	megabob	12	10,825	02-22-2010 03:36 PM Last Post: NoHachi
	4age bogs. Would like some help!	root	4	5,759	12-30-2009 11:10 AM Last Post: Nomuken
	9.5mm lift camshafts with OEM followers... anyone?	apardal	9	8,959	10-15-2008 03:24 PM Last Post: robokill

User(s) browsing this thread: 5 Guest(s)