|
what forged pistons brand
|
|
10-14-2010, 12:02 PM
Post: #16
|
|||
|
|||
|
Filh, if you wreck so many engines why not make one good one.
modify the head to Oldskew specs (trust me I have seen the results its really good) I would not use Wiseco pistons because the dome is way to steep. Rather take Toda (the top of the dome is flat and better finish) Don't stare yourself blind on compression. IF you enlarge the chamber the Toda will do fine. But lets look the other way around. What kind of engine do you want? Power? torque? Revs? reliability? And then, how much is it allowed to cost? Just randomly building something itsn't that good. I know a guy in NL near the belgium border who is really good with 4age's. If you want I might be able to get you in contact with him. Cars: "99 Lexus IS200 "86 AE86 Kouki Panda Levin GT-Apex (restore project) "84 AE86 Zenki Blue Levin (project racer) Motorcycles: "02 Yamaha R1 "02 Honda Hornet S "08 BMW R1200GS |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
what forged pistons brand - filh - 10-06-2010, 12:25 AM
[] - totta Crolla - 10-07-2010, 11:10 AM
[] - oldeskewltoy - 10-09-2010, 07:48 PM
[] - oldeskewltoy - 10-10-2010, 06:35 PM
[] - robokill - 10-14-2010 12:02 PM
[] - totta Crolla - 10-18-2010, 03:23 PM
[] - oldeskewltoy - 10-24-2010, 05:20 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 82mm Stock compression Pistons | apardal | 4 | 2,862 |
11-24-2021 04:26 PM Last Post: apardal |
|
| Small Port 10.3 Pistons | Alex170984 | 1 | 4,355 |
10-25-2016 09:18 PM Last Post: oldeskewltoy |
|
| Machining Pistons to run 20v head... And FCR's on a 20v? | PazzaAE86 | 2 | 5,128 |
09-15-2013 01:08 AM Last Post: jondee86 |
|
| 9.4:1 or 10:1 pistons? | thanos | 14 | 21,160 |
08-01-2013 12:50 PM Last Post: Ivan141 |
|
| Wiseco Pistons and Oil Squirters | slacker.cam | 1 | 3,376 |
05-15-2012 12:02 AM Last Post: slacker.cam |
|
User(s) browsing this thread: 6 Guest(s)