Bean Bandits Levin 'Globetrotter'

[assassin10000]

The starters have a contact problem with the plunger in the solenoid. Depending on how you torque the batt cable to the starter it will angle one of the contacts inside causing poor contact. They also (pretty commonly) get carbon tracking/buildup and eventually it builds up enough resistance to make it not want to start at times, this can be cleaned up with a dremel/rotary tool and a small wire wheel attatchment.

I've found it best to install the battery cable onto the starter with the cover off the solenoid so I can make sure it doesn't angle the contacts preventing good seating of the plunger.

Andrew