Using Honda springs for coil overs
05-07-2011, 12:15 PM
Post: #19
 
http://forums.pelicanparts.com/porsche-a...ect-1.html

Roll centre discussion..interesting at times.
Still not sure if its really that important in en AE86, but RCA's have the benefit of restoring some of the cambercurve as well, so it won't hurt. Its the rear I'm interested in. With the stock setup, roll centre is WAY up on the car. Above the front to be sure. I would like and try to lower it using a watts link.

Roll centres are complicated. They shouldn't move around as much as they do.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user


Messages In This Thread
Using Honda springs for coil overs - roman - 04-18-2011, 08:49 AM
[] - Ivan141 - 04-18-2011, 09:32 AM
[] - roman - 04-18-2011, 10:17 AM
[] - Uzelac - 04-18-2011, 10:43 AM
[] - roman - 04-18-2011, 11:58 AM
[] - Uzelac - 04-18-2011, 12:18 PM
[] - roman - 04-18-2011, 12:49 PM
[] - Ivan141 - 04-18-2011, 02:12 PM
[] - NoHachi - 04-18-2011, 06:05 PM
[] - NoHachi - 04-18-2011, 06:07 PM
[] - roman - 04-19-2011, 10:15 AM
[] - NoHachi - 04-19-2011, 12:15 PM
[] - roman - 04-19-2011, 01:32 PM
[] - NoHachi - 04-19-2011, 03:49 PM
[] - roman - 04-20-2011, 04:12 AM
[] - NoHachi - 04-20-2011, 08:00 AM
[] - roman - 04-22-2011, 11:36 PM
[] - NoHachi - 04-23-2011, 12:21 AM
[] - NoHachi - 05-07-2011 12:15 PM
[] - NoHachi - 05-07-2011, 12:19 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication