hachiroll`s rust&lowcompressionrolla project

Threaded Mode | Linear Mode

hachiroll`s rust&lowcompressionrolla project

12-01-2011, 02:13 AM

Post: #32

hachiroll Offline

Junior Member

Posts: 36
Joined: Mar 2011
Reputation: 0

Thanks again for replies. But I have some more questions. Yummie!

So here is what mizumo writes about pistons in their rebuild kit:

Pistons with Complete NPR Ring Set (made in Japan)
+ Pistons (We have Standard and oversizes: .50mm = .020" )
+ Complete Ring Set (We have Standard and oversizes: .50mm= .020" )
+ Press Pins (diameter: 18.00mm)
Compression Ratio: 9.4:1
Standard Diameter: 81.00 mm
1st Group: 1.50 mm
2nd Group: 1.50 mm
Oil Ring: 2.80 mm

I am confused by the diameter of pistons which mizumo says standard is 81.00mm.(standard cylinder bore is 81.00mm which means zero clearance between piston and cylinder) According to FSM standard piston diameter is 80.89-80.92mm. Did they intend to say "pistons for standard cylinder bore"?
I am asking this because my block needs reboring and I dont know to what diameter it should be rebored. If the block will be rebored according to FSM to O/S 0.50 which means 81.50mm cylinder bore diameter will 0.50mm oversized pistons fit correctly?

« Next Oldest | Next Newest »

Messages In This Thread

hachiroll`s rust&lowcompressionrolla project - hachiroll - 03-15-2011, 11:45 PM

[] - fax0815 - 03-16-2011, 12:00 AM

[] - hachiroll - 03-16-2011, 12:43 AM

[] - banpei - 03-16-2011, 11:59 PM

[] - Spitfire - 03-17-2011, 09:45 AM

[] - geegaladriel - 03-18-2011, 01:21 PM

[] - hachiroll - 03-19-2011, 02:05 AM

[] - hachiroll - 03-26-2011, 03:33 AM

[] - hachiroll - 03-26-2011, 03:39 AM

Wow - malejyetti - 04-10-2011, 09:03 PM

[] - hachiroll - 04-13-2011, 12:29 AM

[] - fax0815 - 04-13-2011, 12:57 AM

[] - hachiroll - 04-13-2011, 02:10 PM

[] - hachiroll - 04-21-2011, 11:48 PM

[] - fax0815 - 04-22-2011, 04:14 AM

[] - hachiroll - 05-13-2011, 12:36 AM

[] - hachiroll - 05-13-2011, 12:52 AM

[] - hachiroll - 05-13-2011, 01:33 AM

[] - fax0815 - 05-13-2011, 07:53 AM

[] - hachiroll - 11-10-2011, 01:55 AM

[] - hachiroll - 11-10-2011, 02:51 AM

[] - fax0815 - 11-10-2011, 05:48 AM

[] - hachiroll - 11-10-2011, 11:13 PM

[] - fax0815 - 11-12-2011, 09:33 AM

[] - hachiroll - 11-18-2011, 01:59 AM

[] - fax0815 - 11-19-2011, 02:40 AM

[] - hachiroll - 11-25-2011, 07:02 PM

[] - fax0815 - 11-25-2011, 11:58 PM

[] - hachiroll - 11-30-2011, 02:40 AM

[] - fax0815 - 11-30-2011, 03:33 PM

[] - corolla4agze - 11-30-2011, 04:22 PM

[] - hachiroll - 12-01-2011 02:13 AM

[] - Uzelac - 12-01-2011, 10:03 AM

[] - hachiroll - 12-01-2011, 05:44 PM

[] - hachiroll - 12-01-2011, 05:54 PM

[] - fax0815 - 12-01-2011, 11:59 PM

[] - hachiroll - 12-02-2011, 03:23 AM

[] - hachiroll - 12-16-2011, 04:28 PM

[] - hachiroll - 02-21-2012, 02:40 AM

[] - fax0815 - 02-27-2012, 09:12 PM

super - malejyetti - 02-27-2012, 09:38 PM

[] - hachiroll - 03-06-2012, 07:07 PM

[] - hachiroll - 03-06-2012, 08:24 PM

[] - hachiroll - 03-06-2012, 08:27 PM

[] - fax0815 - 03-19-2012, 12:42 AM

[] - hachiroll - 03-20-2012, 02:08 PM

[] - hachiroll - 04-18-2012, 07:11 PM

[] - hachiroll - 04-18-2012, 08:13 PM

[] - BOOMEX - 04-18-2012, 10:02 PM

[] - hachiroll - 04-24-2012, 03:25 AM

[] - fax0815 - 04-24-2012, 12:06 PM

[] - corolla4agze - 04-24-2012, 01:19 PM

[] - hachiroll - 04-24-2012, 03:35 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Kaboom Project #62 [KP62] & Toyota scrapyard	meshin	9	12,862	02-05-2010 10:45 AM Last Post: nmwisima
	Bought a Ae86 and super scared cause of rust can any one hel	adamsaiyad	19	20,752	12-02-2009 02:29 AM Last Post: [Walaki]D`Lair

User(s) browsing this thread: 12 Guest(s)