DIV 1 rally/track 4AGE(objective +- 130 whp)

[Project D]

OK ! Now I understand ^^
You just want to keep your car "street legal" and you registered your car on Division 1 to allow you to have a roll cage
I have a friend in Belgium who tried that but he have ITB's and MSPNP.
-> Still road legal (he manage to pass the normal inspection with them ^^) but he can't have a roll cage...

MSPNP + Poncam would be great combo.

For the injectors you don't need something that big like 300cc
-> injectors around 250cc should be enough. (a fuel pressure regulator may be useful too)

You should also rise the compression ratio around 11.5:1
(12:1 would be best but little harder to tune with low octane fuel)

Buy a good set of (forged) pistons or shave your head
(just 0.8mm head gasket + AE92 pistons would be not enough)

BTW many late AE86 (made in 86/87) in europe have 7rib engine but internally they are just like bluetop (40/18mm).
You should look before buying anything.

Cam gears -> not really necessary with poncam (since they are made to be straight fit) but always good to have them.