OST-017: Ed Sullivan it ain't!

[oldeskewltoy]

from another forum Wrote:do you have a template to ensure repeatable shaping? From looks alone it seems you're being very consistent with your final shape.

I do have a few things I use... but making a chamber 39.5cc with O/S valves is not easy, and right now "we" are in a tempory hold pattern. Each of the chambers are getting pushed out to 39cc (+ or -) and I'm waiting for the client to send me one of his pistons.......

An Atlantic pistons has a dome peak of about 7mm, and the width of that peak is about 68mm long centered in the piston. my client told me his dome peak is close to 10mm and 74mm long.....

That is HUGE.... I did some sample measurements and the peak of the chamber measures out to a little over 15mm total depth...... the spark plug sits about 7.4mm tall........ "Houston, we have a problem"

I've asked the client to send me one of his pistons so I can see how his pistons fit my chamber work..

If the pistons interferes.... I'll be bringing it all to my buddies (Loynings) to get their take.... and try to figure out an effective solution if one is needed