NA Build Questions | Blue-/ Redtop questions
02-15-2013, 10:15 PM
Post: #7
 
oldeskewltoy Wrote:
Jan Pedersen Wrote:It doesn't have to say TODA to be good Wink Take a look at catcams - they have a nice selection of 4AGE cams that are about half the price of Toda...

Other camshaft suppliers besides Catcams..... I recommend the OP do some reserch into dynamic compression ratio and build an engine based on that.....

Jan Pedersen Wrote:Personally I would prefer the redtop with the lighter internals from a bluetop. Add a bit of headwork, bumped CR, ECU and bluetop cams and you have 140 hp.

Not sure you'd get to 140... 135 to 140 might be possible... but adding a 256 type camshaft should get you there, and at least allows the engine to pull to over 7000 rpm. Both sets of stock cams (240 and 232 duration) tap out at about 6600......
I know there are many other brands but to me it seems that catcams are pretty good value.

142 hp at the flywheel with dyno sheet to prove it Wink

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 -  ]
Visit this user's website Find all posts by this user


Messages In This Thread
[] - cavey - 02-15-2013, 04:03 PM
[] - Jan Pedersen - 02-15-2013, 05:46 PM
[] - oldeskewltoy - 02-15-2013, 08:40 PM
[] - Bean - 02-15-2013, 09:32 PM
[] - ditn - 02-15-2013, 10:02 PM
[] - Jan Pedersen - 02-15-2013 10:15 PM
[] - Project D - 02-15-2013, 11:24 PM
[] - d3nso - 02-16-2013, 12:42 AM
[] - fax0815 - 02-16-2013, 04:00 AM
[] - d3nso - 02-16-2013, 08:51 PM
[] - oldeskewltoy - 02-25-2013, 12:31 AM
[] - fax0815 - 02-25-2013, 02:37 AM
[] - Bean - 02-25-2013, 07:55 AM
[] - d3nso - 02-25-2013, 01:46 PM
[] - Bean - 02-25-2013, 05:44 PM
[] - oldeskewltoy - 02-25-2013, 07:01 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  7AGE Build apardal 5 710 08-02-2024 12:11 PM
Last Post: apardal
  Build your own adjustable fuel pressure regulator ;) oldeskewltoy 8 20,803 08-19-2018 12:08 PM
Last Post: AlexKTM
  4age blue top from MR2 same intake manifold? dinkers542 8 10,291 11-02-2014 05:24 PM
Last Post: ditn
  My 4AGE N/A build Lewy 17 19,508 01-25-2013 04:42 PM
Last Post: Lewy
  what bearings for my build? Bean 6 6,333 09-22-2012 10:25 PM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 12 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication