9.4:1 or 10:1 pistons?

Threaded Mode | Linear Mode

9.4:1 or 10:1 pistons?

05-15-2013, 02:59 PM

Post: #4

ga_goosh Offline

Junior Member

Posts: 42
Joined: Jan 2009
Reputation: 0

9.4 slug STD: 13101-16020
9.4 slug O/S .050: 13103-16020

10.1 slug STD: 13101-16030
10.1 slug O/S .05: 13103-16030

the 10.1 piston is a europe only part.

the 13101 is the STD bore size 13103 is the O/S version of the same piston. the 16030 (10.1) and 16020 (9.4) is the comp type

you can tell by looking at the piston dome. the 10.1 has the protruding dome and the 9.4 does not
[Image: AEU86 AE86 - ]

i [color=red:b86a4369c5]<3[/color:b86a4369c5] AE86

« Next Oldest | Next Newest »

Messages In This Thread

9.4:1 or 10:1 pistons? - thanos - 03-13-2013, 03:37 PM

[] - Project D - 03-13-2013, 03:48 PM

[] - thanos - 03-13-2013, 07:51 PM

[] - ga_goosh - 05-15-2013 02:59 PM

[] - thanos - 05-15-2013, 03:42 PM

[] - Alex170984 - 05-15-2013, 04:52 PM

Re: 9.4:1 or 10:1 pistons? - oldeskewltoy - 05-16-2013, 03:25 AM

[] - Ivan141 - 07-30-2013, 11:02 PM

[] - oldeskewltoy - 07-31-2013, 12:34 AM

[] - Alex170984 - 07-31-2013, 12:58 PM

[] - Ivan141 - 07-31-2013, 05:20 PM

[] - Ivan141 - 07-31-2013, 09:46 PM

[] - Alex170984 - 07-31-2013, 11:08 PM

[] - pack - 08-01-2013, 11:37 AM

[] - Ivan141 - 08-01-2013, 12:50 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	82mm Stock compression Pistons	apardal	4	2,815	11-24-2021 04:26 PM Last Post: apardal
	Small Port 10.3 Pistons	Alex170984	1	4,344	10-25-2016 09:18 PM Last Post: oldeskewltoy
	Machining Pistons to run 20v head... And FCR's on a 20v?	PazzaAE86	2	5,090	09-15-2013 01:08 AM Last Post: jondee86
	Wiseco Pistons and Oil Squirters	slacker.cam	1	3,357	05-15-2012 12:02 AM Last Post: slacker.cam
	Silver top pistons	panda_tureno86	1	2,931	01-30-2012 01:23 PM Last Post: panda_tureno86

User(s) browsing this thread: 4 Guest(s)