Small question about wheels

[jondee86]

These are adapters...



http://prowheeladapters.com/4x100-to-4x4...apter.html

You just need to do some measuring to make sure that your wheels will
fit without the tyres rubbing if you use adapters (also known as bolt-on
wheel spacers). Check your local legislation to make sure they are legal
(if you care) before buying. Some countries require the spacers to be
hub-centric and stipulate the maximum thickness allowed.

You also need to check if there are recesses in the back of your wheels
between the bolt holes. If you use 25mm thick spacers and your existing
wheel studs are 30mm long, the extra has to have somewhere to go !!

Cheers... jondee86