cams cams cams
|
09-04-2013, 09:25 PM
Post: #24
|
|||
|
|||
If you want 'drop in' cams then you would not be able to use the Catcams as the lift is too high and a fair bit of material needs to be removed from the head.
The piper cams are I believe the same as the ones Raw engineering supply in their 160hp kit and the Kent cams are similar to the Piper ones. An analogue brain in a digital World |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
cams cams cams - megabob - 08-29-2013, 01:31 PM
[] - Alex170984 - 08-30-2013, 04:53 PM
[] - oldeskewltoy - 08-30-2013, 08:53 PM
[] - oldeskewltoy - 09-04-2013, 09:17 PM
[] - totta Crolla - 09-04-2013 09:25 PM
[] - totta Crolla - 09-04-2013, 10:31 PM
[] - oldeskewltoy - 09-04-2013, 11:53 PM
[] - totta Crolla - 09-05-2013, 12:48 AM
[] - Alex170984 - 09-12-2013, 02:49 PM
[] - Alex170984 - 09-12-2013, 02:51 PM
[] - Alex170984 - 09-13-2013, 02:56 PM
[] - oldeskewltoy - 09-13-2013, 07:30 PM
[] - oldeskewltoy - 09-20-2013, 07:44 PM
[] - totta Crolla - 09-20-2013, 11:44 PM
[] - Alex170984 - 09-23-2013, 03:11 PM
[] - totta Crolla - 09-24-2013, 10:44 PM
[] - Alex170984 - 10-24-2013, 01:17 PM
[] - Alex170984 - 10-24-2013, 04:47 PM
[] - oldeskewltoy - 10-24-2013, 10:46 PM
|
User(s) browsing this thread: 18 Guest(s)