cams cams cams
|
09-05-2013, 12:48 AM
Post: #28
|
|||
|
|||
Bean Bandit Wrote:totta Crolla Wrote:If you want 'drop in' cams then you would not be able to use the Catcams as the lift is too high and a fair bit of material needs to be removed from the head.I got the ...138 from catcams with 9.5mm lift on the intake side and it cleared my head with space to spare... Actually Bean as I think you know I have the same cams as you and mine have good mid range power and then a nice boost in power at around 6000rpm as well as an engine note change. I have mine set as per the lift @ TDC suggested by the manufacturer. How are yours performing ? An analogue brain in a digital World |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
cams cams cams - megabob - 08-29-2013, 01:31 PM
[] - Alex170984 - 08-30-2013, 04:53 PM
[] - oldeskewltoy - 08-30-2013, 08:53 PM
[] - oldeskewltoy - 09-04-2013, 09:17 PM
[] - totta Crolla - 09-04-2013, 09:25 PM
[] - totta Crolla - 09-04-2013, 10:31 PM
[] - oldeskewltoy - 09-04-2013, 11:53 PM
[] - totta Crolla - 09-05-2013 12:48 AM
[] - Alex170984 - 09-12-2013, 02:49 PM
[] - Alex170984 - 09-12-2013, 02:51 PM
[] - Alex170984 - 09-13-2013, 02:56 PM
[] - oldeskewltoy - 09-13-2013, 07:30 PM
[] - oldeskewltoy - 09-20-2013, 07:44 PM
[] - totta Crolla - 09-20-2013, 11:44 PM
[] - Alex170984 - 09-23-2013, 03:11 PM
[] - totta Crolla - 09-24-2013, 10:44 PM
[] - Alex170984 - 10-24-2013, 01:17 PM
[] - Alex170984 - 10-24-2013, 04:47 PM
[] - oldeskewltoy - 10-24-2013, 10:46 PM
|
User(s) browsing this thread: 10 Guest(s)