cams cams cams
|
09-13-2013, 07:30 PM
Post: #45
|
|||
|
|||
there can be differences in cam gears.... mostly based on the pin diameters....
check for pin fit... either no fit... T3 type with an "opened" up pin hole or loose fit - SS Works timing pulleys I eventually went with the T3, I opened them up for a perfect zero tolerance (no slop) fit Oh... there is another problem with the T3 pulleys... I was able to overcome once they told me... they mis-machined the location of the opening for the intake pin... they did tell me how to fix it... I made a diagram to better understand how to set T3 timing Dan - You can | .... OR you can ask for help!!! OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
cams cams cams - megabob - 08-29-2013, 01:31 PM
[] - Alex170984 - 08-30-2013, 04:53 PM
[] - oldeskewltoy - 08-30-2013, 08:53 PM
[] - oldeskewltoy - 09-04-2013, 09:17 PM
[] - totta Crolla - 09-04-2013, 09:25 PM
[] - totta Crolla - 09-04-2013, 10:31 PM
[] - oldeskewltoy - 09-04-2013, 11:53 PM
[] - totta Crolla - 09-05-2013, 12:48 AM
[] - Alex170984 - 09-12-2013, 02:49 PM
[] - Alex170984 - 09-12-2013, 02:51 PM
[] - Alex170984 - 09-13-2013, 02:56 PM
[] - oldeskewltoy - 09-13-2013 07:30 PM
[] - oldeskewltoy - 09-20-2013, 07:44 PM
[] - totta Crolla - 09-20-2013, 11:44 PM
[] - Alex170984 - 09-23-2013, 03:11 PM
[] - totta Crolla - 09-24-2013, 10:44 PM
[] - Alex170984 - 10-24-2013, 01:17 PM
[] - Alex170984 - 10-24-2013, 04:47 PM
[] - oldeskewltoy - 10-24-2013, 10:46 PM
|
User(s) browsing this thread: 8 Guest(s)