DIY: Hopeless project.

[Rascal21]

I got the new Ignition Module, but things wont settle for the better.
No fuel (new pump), no spark (new ignition module, tried a total of 5 coils).

After one startup try, #3 plug was wet, all others were dry.

So I managed to get the injector plugs off and measured voltage with ignition on, there is no voltage.

I took off the + and - leads that go from Ignition Module and to the coil, and measured Voltage with ignition on, and got 5,5 Volts with the old Ignition Modules and 6,9 Volts with the new one.

I installed the + and - leads back onto the Coil, and turned ignition on, and measured 0 Volts on the same wires, so I`m assuming this is because the Coil is charging.

So I checked if ECU got power from ignition and battery, which it does, I opened ECU to check for burn marks, blown capacitors etc, all seems well.

Seems I have no more cards left to play..