Thermal imaging of R888s at trackday

[roman]

Hey,

My car (Carina coupe) has previously been running 3.5kg spring all round, quite a stiff front bar and no rear swaybar.

Previously using AD08R, just changed to R888 as well as fitted some stiffer front springs (now 5kg)

So here's some thermal imaging results of tyres after getting back into the pits: (apology if its confusing but front tyre pics are taken from the front, rear tyres photo taken from the back)



The car felt a little more understeery with the 5kg springs in front, you can now see that this is loading up the left rear a lot.

I think from here I'll look at fitting the rear sway bar up. Was running 32psi hot all round and neg 2.2 degrees camber up front.