Apex RSM

[jondee86]

The RSM instructions show this diagram to remove speed cut...



However, a quick google tells me that the 180km/hr speed limit was not
introduced in Japan until 1988... so chances are the AE86 did not have
speed cut. I've never seen it mentioned in any of the wiring documentation
for the AE86, only for later model cars.

But if you do find a speed cut wire, use male and female bullet connectors
so that you can just plug the cut wire back together if you take the RSM
out. Vampire clips should be fine, as long as you use the correct size for the
wires you are tapping. There is no current being carried, only signal voltage.

Cheers... jondee86