Krullibulls Ae86 BEAMS is the only way

[krullibull]

(03-24-2017 10:54 AM)kjb Wrote:  I hate to sound like a dick but that oil pressure sensor is going to break again when you least expect it!
Putting a length of hose between the measuring port & sensor lets you mount the sensor properly.

Other than that, looks good

How is the 6spd working for you? I loved the ratios on my J160 (mine is from an IS200) but thats just about the only good thing I have to say about it

Nothing "dicky" about it mate! . The new adapter is steel so if something is going to break it will probably be the aluminum. If i remove the lower pan I'm going to re-thread it to 1/8 NPT. But the hose is not a bad idea!

I like it. Only bad thing (except it breaking) is that the reverse lock out is too weak so it's easy to get hung up when going from 3rd to 2nd mid drift. My "new" gearbox is from a IS200, just need to swap the front parts over.


Yes for the new clutch I'm going to go for a proper brand. Most likely Exedy. Don't have time to hassle with inferior parts, esp. since we just bought a house .