EUDM gauge cluster

[Bean]

I just took my spare cluster apart and allthough there are 2 connections (pin 10&11 on the white connector) going to the speedometer, they don't seem to be a switch as far as I can tell. I checked for continuity and it's always on no matter what position the needle has. I can only assume they are there to make the speedo needle work (converting the mechanical spinning to a 'steady' needle position). Which kind of makes sense now that I type and think about it.
Also looking at the electric manual the pin out on LHD and RHD seems to have quite a few differences too, so pluging in the other version as is won't work.

Let me know if you need anything else.

Sent from my SM-T800 using Tapatalk