The RGB dash project

[Ivan141]

Got some lighting rigged up for christmas:

A ton of weird issues kept this little project hidden away in a drawer for years but I decided to get angry at it and here is some form of result.
The green looks a little washed out in the vid but that's just due to my camera.

There are lots of things to fix left, most importantly:

-The needle lighting board for the tach cant be addressed properly due to some incompatibility between the bus protocols of the chips I used.. need to move it to the speedo-side PCB if I can make enough space there.
Needle boards also need to be remade because of an error in the footprint I used.

-The USB interface is crap and wont work.. it's also not very practical so I will replace it with a bluetooth interface.

-Work out the software to have lots of configurable options.

-Create some workable mounting tabs to hold the boards in place.

Merry Xmas everybody!