Vacuum connections on AE86/4AG ??
05-06-2005, 01:17 PM
Post: #1
Vacuum connections on AE86/4AG ??
Hi all,

I'm putting together my neverending project, and now I have 2 vacuum bits which I don't know where they were fixed.

First one is the vacuum sensor for the economy meter, somewhere below the throttle body on the left side of the engine bay... Is this sensor used for anything else than the economy meter? If not I'l remove it, my tach hasn't got an economy meter any more anyway...

[Image: AEU86 AE86 - Vacuum connections on AE86/4AG ??]

the secon one seems to be a vacuum switch, but I don't know what for, it is connected to the "N" port of the throttle body and has a green connector. the second vacuum line is quite short and I have no vacuum connection left where to put the line... and I don't know where this one was fixed either.

[Image: AEU86 AE86 - Vacuum connections on AE86/4AG ??]

Any pics and tips would be of great help!

thanks,
Patrick
Find all posts by this user


Messages In This Thread
Vacuum connections on AE86/4AG ?? - PetzK - 05-06-2005 01:17 PM
[] - Ivan141 - 05-06-2005, 02:31 PM
[] - PetzK - 05-06-2005, 04:10 PM
[] - Ivan141 - 05-06-2005, 04:56 PM
[] - Knudsen - 05-06-2005, 05:43 PM
[] - PetzK - 05-09-2005, 09:03 AM
[] - Knudsen - 05-09-2005, 09:23 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Question about 4AG 20v Engine Block CHACAMAN 1 1,580 06-10-2022 05:17 PM
Last Post: oldeskewltoy
  Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP mister86 12 10,832 02-10-2020 06:39 PM
Last Post: Power_uP
  Toda timing info - with good general 4AG timing info too oldeskewltoy 0 4,254 11-05-2016 01:34 AM
Last Post: oldeskewltoy
  SOME 4AG valve spring specs oldeskewltoy 5 13,242 05-04-2015 01:17 PM
Last Post: Project D
  US-spec vacuum hard lines LordTD 2 4,947 04-27-2015 07:18 PM
Last Post: Project D

Forum Jump:


User(s) browsing this thread: 8 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication