Banpei's new TA60 family cruiser

[banpei]

Thanks both for the advice!
I do have a ratchet with screwdriver bits and also an impact wrench, but the bits are actually too small to have any leverage on the shock. That's why there are scores on the one in the photo. I was planning on visiting the professional tools shop next week and see if they have bits that are larger. I'll keep the chisel in mind as a last resort.

Insulators are expected to arrive on Tuesday, bushings are still unknown as United Arabs tracking just says they left the country.
Correction: insulators have arrived today!

JP-Carparts sent them from Japan on Wednesday and they already have arrived!
Correction #2: bushings already have arrived in NL. I just paid import duties, so lets hope they will arrive early next week.

Also some bad news I'm afraid: the Carina failed MOT today.
There were three problems:
1. Difference in brake force between left and right. I might not have bled the brakes well enough or it could be some other problem
2. Brakelines at the rear were rusty, so they need to be sanded down. I was planning to do this anyway
3. Exhaust leaks a tiny bit between two joins, so I probably need to replace the gasket
If there were only two problems, I would have passed and they would have made them advisories. As there were three problems they couldn't make me pass. I already ordered the correct gaskets for the exhaust, so I'll hopefully fit them next week.