Banpei's new TA60 family cruiser

[banpei]

Another week, more progress!

There are two hexagonal bolts at the back of the lamphousing and they do adjust the headlamps. The upper one adjusts the horizontal axis and the lower one the vertical axis. So headlamps have been adjusted now.

I also looked at the exhaust and found it in this condition:

I loosened the bolts and found the metal was in okay condition. The problem seemed to be that due to rust the gaps were bigger and hence it was leaking.

So I applied some exhaust putty and waited for it to cure:

After the third attempt it is now fully sealed!

That means I have crossed out all issues on the MOT list and I can schedule another one!