AEU86 : EU AE86 Community - AE86 - AE86 : Technical v - mixing blocks and heads

mixing blocks and heads
06-01-2005, 05:26 PM
Post: #4
banpei Offline
Super Moderator
******
 		Posts: 11,576
Joined: Aug 2004
Reputation: 7
 
jamiemirror Wrote:7AF(E)+ 4AGE head=7AGE - yes, it's possible (and described in tech section of Club4AG).
7AFE is 81mm bore (same as 4A series) - difference is in crankshaft (stroke).
We have our own howto written by H37RO:
http://www.aeu86.org/Writeup/Engine/4AGE...index.html
and
http://www.aeu86.org/viewtopic.php?t=1064&start=0

Cool
1983 - AE86 Sprinter Trueno - import project
2013 - Honda Civic sport - daily driver
2004 - AEU86 dot ORG - daily domain

Support our forum, buy from the AEU86 shop:
[Image: AEU86 AE86 -  ]
Visit this user's website Find all posts by this user


Messages In This Thread
mixing blocks and heads - Apolan - 06-01-2005, 02:25 PM
[] - adomz - 06-01-2005, 02:41 PM
[] - jamiemirror - 06-01-2005, 04:07 PM
[] - banpei - 06-01-2005 05:26 PM
[] - adomz - 06-01-2005, 09:32 PM
[] - Apolan - 06-02-2005, 08:55 AM
[] - PetzK - 06-02-2005, 08:58 AM
[] - Ivan141 - 06-02-2005, 09:04 AM
[] - dAYTONA - 09-24-2006, 03:45 AM
[] - Mux213 - 09-24-2006, 09:37 AM
[] - dAYTONA - 09-24-2006, 10:47 AM
[] - S.K. - 09-24-2006, 12:09 PM
[] - Mux213 - 09-24-2006, 12:34 PM
[] - dAYTONA - 09-24-2006, 04:09 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication