Poll: Would you choose carbs (Weber, Dellorto, Mikuni...) instead of the stock EFI of the 4AG?
I'd choose carbs
I'd choose EFI
I'd choose ITB (independed throttle bodies, added later by MODSmile)
[Show Results]
 
Carbs for the 4AG
06-17-2005, 09:48 PM
Post: #42
 
The ultrasound will 'vibrate' larger dirt particals that normally do not disolve or keep the fluid from reaching inside the injector and brake them up and loosen them from the surface they stick to. This way the injectors get really really clean.

I had my DeLorean injectors done with great success, unfortunally dirt in the fuel system has already taken its toll since then... 25 year old crap...Smile

Greetz,

Bastiaan "mux213" Olij

Moved down under, no more hachi Sad
Find all posts by this user


Messages In This Thread
Carbs for the 4AG - SutteR - 06-14-2005, 10:27 PM
[] - banpei - 06-15-2005, 01:22 PM
[] - SutteR - 06-15-2005, 01:34 PM
[] - SutteR - 06-15-2005, 01:35 PM
[] - jamiemirror - 06-15-2005, 01:39 PM
[] - SutteR - 06-15-2005, 01:43 PM
[] - jamiemirror - 06-15-2005, 01:50 PM
[] - SutteR - 06-15-2005, 03:08 PM
[] - meshin - 06-15-2005, 04:45 PM
[] - SutteR - 06-15-2005, 05:32 PM
[] - SekiguchiUeno - 06-15-2005, 06:17 PM
[] - SutteR - 06-15-2005, 06:34 PM
[] - SekiguchiUeno - 06-15-2005, 09:27 PM
[] - SutteR - 06-15-2005, 09:43 PM
[] - jamiemirror - 06-16-2005, 11:08 AM
[] - SutteR - 06-16-2005, 11:27 AM
[] - jamiemirror - 06-16-2005, 11:32 AM
[] - SutteR - 06-16-2005, 11:38 AM
[] - jamiemirror - 06-16-2005, 11:47 AM
[] - SutteR - 06-16-2005, 12:21 PM
[] - SutteR - 06-16-2005, 03:15 PM
[] - jamiemirror - 06-16-2005, 04:17 PM
[] - SutteR - 06-16-2005, 04:29 PM
[] - jamiemirror - 06-16-2005, 04:35 PM
[] - SutteR - 06-16-2005, 04:39 PM
[] - jamiemirror - 06-16-2005, 04:42 PM
[] - SutteR - 06-16-2005, 04:49 PM
[] - SutteR - 06-17-2005, 11:27 AM
[] - jamiemirror - 06-17-2005, 11:32 AM
[] - Mux213 - 06-17-2005, 11:39 AM
[] - meshin - 06-17-2005, 12:30 PM
[] - SutteR - 06-17-2005, 12:46 PM
[] - Ivan141 - 06-17-2005, 03:54 PM
[] - SutteR - 06-17-2005, 04:12 PM
[] - Mux213 - 06-17-2005, 04:16 PM
[] - SutteR - 06-17-2005, 09:04 PM
[] - jamiemirror - 06-17-2005, 09:10 PM
[] - SutteR - 06-17-2005, 09:14 PM
[] - jamiemirror - 06-17-2005, 09:30 PM
[] - SutteR - 06-17-2005, 09:35 PM
[] - jamiemirror - 06-17-2005, 09:39 PM
[] - Mux213 - 06-17-2005 09:48 PM
[] - SutteR - 06-17-2005, 10:00 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Question about 4AG 20v Engine Block CHACAMAN 1 1,599 06-10-2022 05:17 PM
Last Post: oldeskewltoy
  Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP mister86 12 10,898 02-10-2020 06:39 PM
Last Post: Power_uP
  Toda timing info - with good general 4AG timing info too oldeskewltoy 0 4,268 11-05-2016 01:34 AM
Last Post: oldeskewltoy
  SOME 4AG valve spring specs oldeskewltoy 5 13,295 05-04-2015 01:17 PM
Last Post: Project D
  tacho issues using haltech e6x on 4ag 20v bluehachi 5 7,009 06-05-2013 06:34 PM
Last Post: Rasteirinho

Forum Jump:


User(s) browsing this thread: 8 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication