What´s Your watertemp when driving
07-06-2005, 06:08 AM
Post: #5
 
the radi is from griffin radiator, it is for a scirroco drag race application. it is 2 core, but each core is 2.5cm wide. it is shorter than an 86 one.

i hear they are starting to make ones to fit the 86. look at taka on club4ag. he is sponsored by griffin. i just happened to get my radiator before he got one made for him. i had to use reducers on the piping.

also the radiator is cross-flow, meaning it will run cooler than most down flow radi's.

and brand new it was like 220USD, with a fan and shroud is 500USD.
[Image: AEU86 AE86 -  ]

http://www.griffinrad.com for info. mine is 2-28185-X part number

[Image: AEU86 AE86 -  ]
Visit this user's website Find all posts by this user


Messages In This Thread
[] - James - 07-02-2005, 04:37 AM
[] - AEsuperG - 07-04-2005, 12:32 PM
[] - Denmark - 07-04-2005, 09:40 PM
[] - AEsuperG - 07-06-2005 06:08 AM
[] - Denmark - 07-06-2005, 08:43 AM
[] - Veiss - 08-05-2005, 12:30 AM
[] - Mux213 - 08-05-2005, 08:04 AM
[] - Denmark - 08-05-2005, 12:05 PM
[] - AEsuperG - 08-07-2005, 01:06 AM
[] - KristianAE86 - 08-07-2005, 04:50 PM
[] - Denmark - 08-08-2005, 11:21 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Can you convert your 86 back too the original state? gh0st 7 2,691 04-25-2022 04:25 PM
Last Post: gh0st
  Build your own adjustable fuel pressure regulator ;) oldeskewltoy 8 20,781 08-19-2018 12:08 PM
Last Post: AlexKTM
  How would/have you rebuild your 4age? joaotcgt 6 8,844 07-21-2015 10:40 AM
Last Post: mad.matt
  Your Attention, Please.... oldeskewltoy 1 3,690 07-30-2014 09:04 PM
Last Post: driftmaniacae86
  How to adjust the idle speed on your Toyota 4A-GE motor Homem Bomba 1 4,416 06-30-2013 01:08 PM
Last Post: Homem Bomba

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication