Hard Start and Rough Idle
11-27-2005, 03:52 PM
Post: #3
 
The distributor is put according to the 4AGE book. I had the same thoughts so I double checked (!!). It is positioned correctly.

When write about smaller advance or restored position I mean moving the distributor with loosened(not removed) bolts. When I say "normal position" i mean 10 degrees before TDS or the bolts exactly in the centre of their holes.

10x

AE86 GTS '84 Red Top
Find all posts by this user


Messages In This Thread
Hard Start and Rough Idle - Bad_Dog - 11-26-2005, 06:43 PM
[] - Ivan141 - 11-26-2005, 10:35 PM
[] - Bad_Dog - 11-27-2005 03:52 PM
[] - Apolan - 11-27-2005, 05:20 PM
[] - jamiemirror - 11-27-2005, 06:11 PM
[] - Bad_Dog - 11-27-2005, 06:35 PM
[] - Bad_Dog - 11-27-2005, 06:37 PM
[] - Ivan141 - 11-27-2005, 07:51 PM
[] - Apolan - 11-27-2005, 08:24 PM
[] - Ivan141 - 11-28-2005, 12:36 AM
[] - H7ERO - 11-28-2005, 02:05 AM
[] - Bad_Dog - 11-28-2005, 10:01 AM
[] - Apolan - 11-28-2005, 05:04 PM
[] - Bad_Dog - 11-29-2005, 12:54 PM
[] - Bad_Dog - 11-29-2005, 06:54 PM
[] - Bad_Dog - 12-05-2005, 04:05 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Refreshed 20v blacktop first start.. Mylesmck 6 690 10-07-2024 07:55 AM
Last Post: Ivan141
  Warm start problem DJexor 5 2,236 03-09-2023 10:15 AM
Last Post: Ivan141
  No idle below 2000 rpm rich running Steller Engineering 3 1,442 11-30-2022 02:45 PM
Last Post: RolanTHUNDER
  Engine starts/revs but no idle GenkiMotors 17 7,263 11-20-2021 04:12 AM
Last Post: GenkiMotors
  exhaust odor/idle MOT issue Ryo 7 7,272 07-15-2019 09:17 AM
Last Post: jondee86

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication