Hard Start and Rough Idle
11-27-2005, 06:11 PM
Post: #5
 
Quote:When I say "normal position" i mean 10 degrees before TDS or the bolts exactly in the centre of their holes.

Try 6 deg.
Visit this user's website Find all posts by this user


Messages In This Thread
Hard Start and Rough Idle - Bad_Dog - 11-26-2005, 06:43 PM
[] - Ivan141 - 11-26-2005, 10:35 PM
[] - Bad_Dog - 11-27-2005, 03:52 PM
[] - Apolan - 11-27-2005, 05:20 PM
[] - jamiemirror - 11-27-2005 06:11 PM
[] - Bad_Dog - 11-27-2005, 06:35 PM
[] - Bad_Dog - 11-27-2005, 06:37 PM
[] - Ivan141 - 11-27-2005, 07:51 PM
[] - Apolan - 11-27-2005, 08:24 PM
[] - Ivan141 - 11-28-2005, 12:36 AM
[] - H7ERO - 11-28-2005, 02:05 AM
[] - Bad_Dog - 11-28-2005, 10:01 AM
[] - Apolan - 11-28-2005, 05:04 PM
[] - Bad_Dog - 11-29-2005, 12:54 PM
[] - Bad_Dog - 11-29-2005, 06:54 PM
[] - Bad_Dog - 12-05-2005, 04:05 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Refreshed 20v blacktop first start.. Mylesmck 6 690 10-07-2024 07:55 AM
Last Post: Ivan141
  Warm start problem DJexor 5 2,236 03-09-2023 10:15 AM
Last Post: Ivan141
  No idle below 2000 rpm rich running Steller Engineering 3 1,442 11-30-2022 02:45 PM
Last Post: RolanTHUNDER
  Engine starts/revs but no idle GenkiMotors 17 7,263 11-20-2021 04:12 AM
Last Post: GenkiMotors
  exhaust odor/idle MOT issue Ryo 7 7,272 07-15-2019 09:17 AM
Last Post: jondee86

Forum Jump:


User(s) browsing this thread: 12 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication