AE92 Head and Block
01-04-2006, 11:01 AM
Post: #7
 
Don't go with a bigger TB..or you will loose your cherished throttle response for "maybe" 2 or 3 ponies up top..The stock Throttle body flows just fine up to 170hp and even higher.
Fit the supra throttle body when u start to make supra power..

Edit: just remembered..there is one way of doing this. I remember from the miata world that there was one guy making variable ratio throttle linkages..basically a new throttle disc with a couple of holes in it, that allowed u to adjsut the leverage on the throttle..You could have very sensitive small throttle opening characteristics, that got less sensitive with larger throttle positions.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user


Messages In This Thread
AE92 Head and Block - Dogs Danglies - 01-02-2006, 10:26 PM
[] - banpei - 01-02-2006, 10:57 PM
[] - robokill - 01-03-2006, 12:36 AM
[] - Ivan141 - 01-03-2006, 09:43 AM
[] - Dogs Danglies - 01-03-2006, 09:49 PM
[] - Ivan141 - 01-04-2006, 09:36 AM
[] - NoHachi - 01-04-2006 11:01 AM
[] - Dogs Danglies - 01-04-2006, 09:56 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Question about 4AG 20v Engine Block CHACAMAN 1 1,517 06-10-2022 05:17 PM
Last Post: oldeskewltoy
  4AGE block differences explained (incl. some eyecandy) Bean 46 85,538 05-05-2019 04:03 AM
Last Post: Rocker100
  BT head with ST block. CHOPKIN2 6 6,954 02-06-2018 06:27 PM
Last Post: mad.matt
  How important are dowell pins on a 4age block spill86 5 7,359 01-13-2016 11:19 AM
Last Post: spill86
  7 rib block for a bluetop head? dinkers542 7 9,382 11-04-2014 01:44 PM
Last Post: zenki

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication