Adjusting cold idle - how to do?
01-22-2006, 01:46 PM
Post: #14
 
It is, but not with any adjuster screws.. If you look closely in the first of the 3 little pictures above you'll see a hand with the thumb over the airport (which is also marked in the picture). You need to restrict this inlet, that way the amount of air that is bypassed when the engine is cod is less, and the idle will come down accordingly.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user


Messages In This Thread
Adjusting cold idle - how to do? - Knudsen - 01-12-2006, 12:16 AM
[] - Ivan141 - 01-12-2006, 09:22 AM
[] - SutteR - 01-12-2006, 11:01 AM
[] - ZaX - 01-12-2006, 11:35 AM
[] - SutteR - 01-12-2006, 11:41 AM
[] - Knudsen - 01-12-2006, 12:52 PM
[] - Ivan141 - 01-12-2006, 03:36 PM
[] - NickBW - 01-17-2006, 11:19 PM
[] - Ivan141 - 01-18-2006, 09:48 AM
[] - 205t16 - 01-21-2006, 09:56 PM
[] - oldskull - 01-21-2006, 10:05 PM
[] - Black Betty - 01-22-2006, 12:45 PM
[] - Knudsen - 01-22-2006, 01:16 PM
[] - Ivan141 - 01-22-2006 01:46 PM
[] - Black Betty - 01-22-2006, 04:32 PM
[] - Sanity Clause - 01-25-2006, 08:35 PM
[] - SutteR - 01-26-2006, 09:06 AM
[] - Ivan141 - 01-26-2006, 09:19 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  No idle below 2000 rpm rich running Steller Engineering 3 1,281 11-30-2022 02:45 PM
Last Post: RolanTHUNDER
  Engine starts/revs but no idle GenkiMotors 17 6,766 11-20-2021 04:12 AM
Last Post: GenkiMotors
  exhaust odor/idle MOT issue Ryo 7 7,007 07-15-2019 09:17 AM
Last Post: jondee86
  20v silvertop idle issue AlexFourTwenty 3 5,014 12-24-2017 03:27 AM
Last Post: AlexFourTwenty
  Silver top low idle AlexFourTwenty 7 9,869 10-16-2017 10:22 PM
Last Post: AlexFourTwenty

Forum Jump:


User(s) browsing this thread: 9 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication