Megasquirt talk (split from robokills project thread)
03-07-2006, 06:23 PM
Post: #21
 
Denmark Wrote:I did have MS on th ered turbo ae86,and it was working great,

This time i will try a VEMS ecu,as this also have included in the ecu, a wideband controller,so you can both map the car by wideband,but also run closedloop WB.

There is a lambda tabel, as well as fuel ,and ignition.

So you put in what you want the lab´mbda number to be,and the ECU,will run that.

It can also run COP.

This unit is around 400euro,so a bit more expinsive,but not to bad,if you don´t already have a wideband.
/Skassa

Hey Skassa.. I got VEMS om my car and am also gona install VEMS on my EA86. Are you bying yours together with PeterJ?
I heard the guy who bought your old turbo-AE86 isn't driving it too Confused

I don't think VEMS is too expensiv.. for ~400EUR the Wbo2 is inluded and most of the board is assembled (+$ for total assembling) and tested before it's beeing shiped out.
When you got a Wbo2 the computer can also do "closed loop" under bigger load (other AFR)..
Find all posts by this user


Messages In This Thread
[] - Ivan141 - 03-04-2006, 05:51 PM
[] - NoHachi - 03-04-2006, 05:55 PM
[] - robokill - 03-04-2006, 07:35 PM
[] - Ivan141 - 03-04-2006, 07:45 PM
[] - robokill - 03-04-2006, 10:21 PM
[] - Jan Pedersen - 03-05-2006, 12:19 AM
[] - Ivan141 - 03-05-2006, 12:37 PM
[] - Jan Pedersen - 03-05-2006, 02:52 PM
[] - Ivan141 - 03-05-2006, 03:55 PM
[] - SekiguchiUeno - 03-05-2006, 04:37 PM
[] - Ivan141 - 03-05-2006, 05:21 PM
[] - robokill - 03-05-2006, 06:44 PM
[] - NoHachi - 03-06-2006, 04:59 AM
[] - robokill - 03-06-2006, 08:17 AM
[] - Ivan141 - 03-06-2006, 12:12 PM
[] - Denmark - 03-07-2006, 11:11 AM
[] - Ivan141 - 03-07-2006, 12:14 PM
[] - ZaX - 03-07-2006, 01:12 PM
[] - Ivan141 - 03-07-2006, 01:53 PM
[] - KrizKH - 03-07-2006 06:23 PM
[] - firehawk - 03-07-2006, 07:04 PM
[] - robokill - 03-08-2006, 12:31 AM
[] - NoHachi - 03-08-2006, 03:08 AM
[] - robokill - 03-08-2006, 01:25 PM
[] - KrizKH - 03-08-2006, 01:33 PM
[] - Ivan141 - 03-08-2006, 01:43 PM
[] - ZaX - 03-08-2006, 05:54 PM
[] - KrizKH - 03-08-2006, 07:22 PM
[] - Denmark - 03-08-2006, 11:51 PM
[] - NoHachi - 03-09-2006, 05:20 AM
[] - Ivan141 - 03-09-2006, 09:09 AM
[] - JMR_AW11 - 03-11-2006, 01:24 PM
[] - robokill - 03-11-2006, 01:51 PM
[] - Mux213 - 03-11-2006, 02:20 PM
[] - Denmark - 03-11-2006, 02:21 PM
[] - JMR_AW11 - 03-11-2006, 03:13 PM
[] - JMR_AW11 - 03-11-2006, 03:51 PM
[] - NoHachi - 03-11-2006, 03:52 PM
[] - JMR_AW11 - 03-11-2006, 04:40 PM
[] - NoHachi - 03-11-2006, 06:25 PM
[] - wouter86 - 09-03-2006, 02:47 PM
[] - jamiemirror - 09-04-2006, 12:38 PM
[] - PetzK - 09-05-2006, 01:55 PM
[] - BenR - 09-05-2006, 05:31 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Lets talk engine mounts kazi 6 7,679 08-31-2017 12:46 PM
Last Post: parrot
  Oil plug thread size is M18x1.5 ???? Dino86 5 9,333 06-07-2012 04:54 PM
Last Post: Dino86
  AE86 Temperature gauge sender thread? 4AGE FORD 1 3,856 03-20-2011 01:25 AM
Last Post: 4AGE FORD
  Megasquirt I v3.0 and toyota distributor/igniter harkes 12 33,707 10-02-2009 01:19 PM
Last Post: Chrisso
  MegaSquirt and Direct Coil Control harkes 1 3,016 06-25-2009 06:19 PM
Last Post: harkes

Forum Jump:


User(s) browsing this thread: 29 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication