Megasquirt talk (split from robokills project thread)

[firehawk]

If you want to do a clean install with plugging the MS directly onto the car's own wiring harness, you might be interested in knowing that the yellow receptacle on the standard AE86 ECU is AMP pulse lock connector p/n 1-172489-7, specifications available here;

http://catalog.tycoelectronics.com/TE/bi...&IDS=44546

http://www.onlinecomponents.com has it listed on their catalog, price is $19 per unit in quantities under 50.

If you need the plugs, their AMP part numbers are as follows;

10pin; 172315-7
18pin; 172316-7
14pin; 172354-7

Contacts inside the plugs are p/n 170352-1.

I still need to find the part number for the large connector located in the engine bay, mounted to the middle of the firewall. This connector attaches the engine harness to the rest of the car so when building a custom harness for the engine, it would be nice to be able to connect it cleanly to the rest of the car at this location.