3rd member talk (ring&pinion setup etc.)

Threaded Mode | Linear Mode

3rd member talk (ring&pinion setup etc.)

08-04-2006, 09:30 PM

Post: #33

eight-six Offline

Member

Posts: 208
Joined: Aug 2005
Reputation: 0

Mocal Differential / Rear End /
Transmission / Oil Cooler Pump

This 12v fluid circulation pump is suitable for various applications: transmission / differential / rear end cooling, turbo oiling, water intercoolers, cool suits etc. The motor is equipped with ball bearing drive and integral cooling fan for long life. The pump is self priming, meaning it can be mounted above the liquid level, and is capable of handling fluid temps up to 300 degrees F. Nylon pump head/housing with viton diaphragm / seals. Pump head can be indexed 90 degrees for convenient fluid connections.

Flow rate 1.0-2.0 GPM and up to 54 PSI
WT 3.5 lbs.
3/8" NPT fittings
8 amp current draw
P/N MOC17522HT

Price dosnt seem to be too bad, its not a £20 fix but if your serious about doing it.

*edit by evil admin #2, removed price*

http://www.eight-six.co.uk - read the blog!

UK AE86 Forum - http://www.phpbber.com/phpbb/index.php?m...ghtsixcouk

« Next Oldest | Next Newest »

Messages In This Thread

3rd member talk (ring&pinion setup etc.) - Ivan141 - 07-24-2006, 10:19 AM

[] - firehawk - 07-24-2006, 08:17 PM

[] - Kas - 07-24-2006, 11:11 PM

[] - SutteR - 07-25-2006, 06:34 AM

[] - Ivan141 - 07-25-2006, 08:26 AM

[] - gon - 07-25-2006, 11:26 AM

[] - Ivan141 - 07-25-2006, 12:44 PM

[] - Mux213 - 07-25-2006, 01:14 PM

[] - NoHachi - 07-25-2006, 02:04 PM

[] - gon - 07-25-2006, 02:49 PM

[] - gon - 07-25-2006, 02:54 PM

[] - Ivan141 - 07-25-2006, 03:49 PM

[] - adomz - 07-25-2006, 04:31 PM

[] - NoHachi - 07-25-2006, 04:53 PM

[] - gon - 07-25-2006, 05:31 PM

[] - wouter86 - 07-25-2006, 08:59 PM

[] - NoHachi - 07-25-2006, 09:31 PM

[] - Ivan141 - 07-26-2006, 08:46 AM

[] - NoHachi - 07-26-2006, 08:58 AM

[] - firehawk - 07-26-2006, 11:05 AM

[] - gon - 07-26-2006, 11:24 AM

[] - Max_Misawa - 07-27-2006, 11:08 AM

[] - Ivan141 - 07-27-2006, 12:00 PM

[] - gon - 07-27-2006, 03:31 PM

[] - Max_Misawa - 07-27-2006, 11:22 PM

[] - Ivan141 - 07-28-2006, 08:15 AM

[] - Max_Misawa - 07-28-2006, 08:18 AM

Re: 3rd member talk (ring&pinion setup etc.) - kenny - 08-03-2006, 12:30 PM

[] - eight-six - 08-03-2006, 08:19 PM

[] - eight-six - 08-03-2006, 08:27 PM

[] - Ivan141 - 08-04-2006, 08:06 AM

[] - SYM - 08-04-2006, 09:24 AM

[] - eight-six - 08-04-2006 09:30 PM

[] - Mux213 - 08-05-2006, 02:06 PM

[] - eight-six - 08-05-2006, 03:40 PM

[] - Mux213 - 08-05-2006, 04:45 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Lets talk engine mounts	kazi	6	7,717	08-31-2017 12:46 PM Last Post: parrot
	Shifting from 4th to 3rd	pack	7	6,244	04-27-2017 07:26 PM Last Post: totta Crolla
	ring gear bolts	DJexor	3	5,417	12-26-2016 10:56 PM Last Post: totta Crolla
	DIY: a quick outline on why & how to set pinion angle.	assassin10000	9	18,351	12-21-2016 10:28 PM Last Post: ditn
	T50 gearbox - TRD 2nd and 3rd gear	hachirokkos	3	6,618	11-27-2015 10:06 AM Last Post: Project D

User(s) browsing this thread: 7 Guest(s)