mixing blocks and heads

Threaded Mode | Linear Mode

mixing blocks and heads

09-24-2006, 12:09 PM

Post: #12

S.K.

Senior Member

Posts: 332
Joined: Apr 2006
Reputation: 1

There is some information

4A-FE and 4A-GE blocks are same.
All crankshaft is not same, all 4A-FE have 48mm/40mm crank and newer 4A-GE have 48mm/42mm crank.
There is at least 2 type of conrods,with 18mm or 20mm upper hole.
Flywheel have 6 or 8 bolts

Anyway, you can use 4A-FE block and put 4A-GE stuff in it.

« Next Oldest | Next Newest »

Messages In This Thread

mixing blocks and heads - Apolan - 06-01-2005, 02:25 PM

[] - adomz - 06-01-2005, 02:41 PM

[] - jamiemirror - 06-01-2005, 04:07 PM

[] - banpei - 06-01-2005, 05:26 PM

[] - adomz - 06-01-2005, 09:32 PM

[] - Apolan - 06-02-2005, 08:55 AM

[] - PetzK - 06-02-2005, 08:58 AM

[] - Ivan141 - 06-02-2005, 09:04 AM

[] - dAYTONA - 09-24-2006, 03:45 AM

[] - Mux213 - 09-24-2006, 09:37 AM

[] - dAYTONA - 09-24-2006, 10:47 AM

[] - S.K. - 09-24-2006 12:09 PM

[] - Mux213 - 09-24-2006, 12:34 PM

[] - dAYTONA - 09-24-2006, 04:09 PM

User(s) browsing this thread: 2 Guest(s)