rim and tyre size?
02-10-2007, 03:10 AM
Post: #17
 
Apolan Wrote:in real life, where people are not willing to spend 1000s of bucks for forged or magnesium wheels, more wheel usually means more weight. and 14' xyz rim will always be lighter than 16' xyz rim, in addition it will shift the weight further away from the center hub - which resoults in poorer acceleration. Also adding to weight is unnecessary width..

i.e. watanabe eightspokes F8F
14x6.5=12.5 lbs
16x7=16.1 lbs

i dont believe that those 2 inches of aditional sidewall weighs more than 3-4 pounds. plus you've pushed the weight further out..

and watanabes are considered to be somewhat light. imagine a heavier wheel. Perhaps some miata owners should write a thing or two about adding weight where it matters the most..

Ouch.... I was just trying to say it is possible and not unrealistic.

I suspect (I'm no engineer, so I don't know....) your mass argument, and how and where it is measured may be skewed.

But accepting all you say... it still can be done, without rubbing and no other significant issues as long as offset is correct.

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Messages In This Thread
rim and tyre size? - Aaron - 02-08-2007, 03:19 PM
[] - Apolan - 02-08-2007, 03:26 PM
[] - Aaron - 02-08-2007, 03:29 PM
[] - Mux213 - 02-08-2007, 04:13 PM
[] - Apolan - 02-08-2007, 07:23 PM
[] - dr.occa - 02-09-2007, 09:39 PM
[] - Denmark - 02-09-2007, 09:43 PM
[] - Apolan - 02-09-2007, 09:46 PM
[] - Denmark - 02-09-2007, 09:49 PM
[] - Knudsen - 02-09-2007, 10:04 PM
[] - dr.occa - 02-09-2007, 10:31 PM
[] - Knudsen - 02-09-2007, 10:58 PM
[] - dr.occa - 02-09-2007, 11:01 PM
[] - Apolan - 02-10-2007, 02:04 AM
[] - oldeskewltoy - 02-10-2007, 02:29 AM
[] - Apolan - 02-10-2007, 02:56 AM
[] - oldeskewltoy - 02-10-2007 03:10 AM
[] - Apolan - 02-10-2007, 03:19 AM
[] - oldeskewltoy - 02-10-2007, 03:28 AM
[] - robokill - 02-10-2007, 03:30 AM
[] - Apolan - 02-10-2007, 03:41 AM
[] - dr.occa - 02-10-2007, 04:29 AM
[] - Denmark - 02-10-2007, 10:22 AM
[] - Knudsen - 02-10-2007, 01:02 PM
[] - Denmark - 02-10-2007, 02:13 PM
[] - peter møller - 02-11-2007, 04:38 AM
[] - Apolan - 02-11-2007, 01:05 PM
[] - SekiguchiUeno - 02-11-2007, 01:12 PM
[] - domi - 02-11-2007, 07:57 PM
[] - peter møller - 02-11-2007, 08:30 PM
[] - domi - 02-12-2007, 05:22 AM
[] - peter møller - 02-12-2007, 09:38 AM
[] - NoHachi - 02-12-2007, 03:46 PM
[] - Denmark - 02-12-2007, 10:25 PM
[] - oldeskewltoy - 02-12-2007, 11:04 PM
[] - peter møller - 02-13-2007, 05:55 AM
[] - Denmark - 02-16-2007, 10:34 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Tyre load index Blaze0010 0 10 Today 01:54 PM
Last Post: Blaze0010
  Shim size for AM cams kazi 4 5,114 12-18-2017 05:34 PM
Last Post: oldeskewltoy
Wink Hub size kazi 5 9,531 06-09-2017 10:06 PM
Last Post: kazi
  Rim width. Which is best.... Dino86 5 6,706 01-07-2017 03:09 PM
Last Post: Dino86
  Camshaft sprocket bolt size? harkes 1 4,589 07-03-2015 12:41 PM
Last Post: Dave W

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication