rim and tyre size?
02-10-2007, 04:29 AM
Post: #22
 
here's how my car performs with my current suspenion setup and on 14x7 (-9 offeset) konig rewinds spinning 185x60s

gymkhana idiot

you'll notice on the second time around the furthest set of cones you'll hear some understeer. the front struts were maybe set one click too stiff (and also probably because i stink) BUT all this is done on street tires. (for further setup info check my garaged car) and though maybe the fronts were too stiff for this small course (course size is going to matter) for high speed entries this would have been a good setup for my wheel and tire setup and with the small amount of hp the car puts out to the wheels. maybe this will help with more of a visual. it really depends on what you want the car to be BEST suited for.
Visit this user's website Find all posts by this user


Messages In This Thread
rim and tyre size? - Aaron - 02-08-2007, 03:19 PM
[] - Apolan - 02-08-2007, 03:26 PM
[] - Aaron - 02-08-2007, 03:29 PM
[] - Mux213 - 02-08-2007, 04:13 PM
[] - Apolan - 02-08-2007, 07:23 PM
[] - dr.occa - 02-09-2007, 09:39 PM
[] - Denmark - 02-09-2007, 09:43 PM
[] - Apolan - 02-09-2007, 09:46 PM
[] - Denmark - 02-09-2007, 09:49 PM
[] - Knudsen - 02-09-2007, 10:04 PM
[] - dr.occa - 02-09-2007, 10:31 PM
[] - Knudsen - 02-09-2007, 10:58 PM
[] - dr.occa - 02-09-2007, 11:01 PM
[] - Apolan - 02-10-2007, 02:04 AM
[] - oldeskewltoy - 02-10-2007, 02:29 AM
[] - Apolan - 02-10-2007, 02:56 AM
[] - oldeskewltoy - 02-10-2007, 03:10 AM
[] - Apolan - 02-10-2007, 03:19 AM
[] - oldeskewltoy - 02-10-2007, 03:28 AM
[] - robokill - 02-10-2007, 03:30 AM
[] - Apolan - 02-10-2007, 03:41 AM
[] - dr.occa - 02-10-2007 04:29 AM
[] - Denmark - 02-10-2007, 10:22 AM
[] - Knudsen - 02-10-2007, 01:02 PM
[] - Denmark - 02-10-2007, 02:13 PM
[] - peter møller - 02-11-2007, 04:38 AM
[] - Apolan - 02-11-2007, 01:05 PM
[] - SekiguchiUeno - 02-11-2007, 01:12 PM
[] - domi - 02-11-2007, 07:57 PM
[] - peter møller - 02-11-2007, 08:30 PM
[] - domi - 02-12-2007, 05:22 AM
[] - peter møller - 02-12-2007, 09:38 AM
[] - NoHachi - 02-12-2007, 03:46 PM
[] - Denmark - 02-12-2007, 10:25 PM
[] - oldeskewltoy - 02-12-2007, 11:04 PM
[] - peter møller - 02-13-2007, 05:55 AM
[] - Denmark - 02-16-2007, 10:34 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Tyre load index Blaze0010 1 536 11-29-2024 09:45 AM
Last Post: Bean
  Shim size for AM cams kazi 4 5,402 12-18-2017 05:34 PM
Last Post: oldeskewltoy
Wink Hub size kazi 5 9,973 06-09-2017 10:06 PM
Last Post: kazi
  Rim width. Which is best.... Dino86 5 6,996 01-07-2017 03:09 PM
Last Post: Dino86
  Camshaft sprocket bolt size? harkes 1 4,766 07-03-2015 12:41 PM
Last Post: Dave W

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication