|
Cam timing help
|
|
12-29-2007, 06:28 AM
Post: #1
|
|||
|
|||
|
Cam timing help
ok so i picked up a nice set of HKS 304/304 8.35mm lift cams. so i was reading bill sheerwoods page on cams, and he says that that size of cam should have a lobe center of around 100-100.
then goes onto explain that if i were to rotate the motor 100 degree clockwise i should see the intake cam be fully opened up. same for exhuast 100 degree counter clockwise exhuast be opened. alright so lets say i do that and my intake isnt fully open. would i then just go back to TDC and then adjust the cam gear a bit(i have fully adjustable gears) and then again rotate 100 degree and see? or is it harder then what it seems? |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Cam timing help - toyota85ae86 - 12-29-2007 06:28 AM
I wanna know how this turns out :)) - jondee86 - 12-31-2007, 08:17 AM
Lobe separation on OEM cams ?? - jondee86 - 01-03-2008, 10:08 AM
Cam lobe separation... - jondee86 - 01-04-2008, 10:42 PM
[] - oldeskewltoy - 05-23-2009, 06:25 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 20v Silvertop stock ignition timing and fueling maps | Lykowsky | 5 | 13,686 |
07-18-2019 03:52 PM Last Post: oldeskewltoy |
|
| Cam Cap Bolt Snapped!! | Alex170984 | 1 | 3,789 |
06-08-2018 01:17 PM Last Post: Ivan141 |
|
| HKS 260 8.0 Cam Card | d3nso | 5 | 7,032 |
02-14-2018 08:29 PM Last Post: oldeskewltoy |
|
| 4agze timing | leon205gti | 11 | 13,798 |
04-07-2017 03:10 AM Last Post: jondee86 |
|
| Toda timing info - with good general 4AG timing info too | oldeskewltoy | 0 | 4,319 |
11-05-2016 01:34 AM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 5 Guest(s)