Time for a good service

[20vWill]

Ivan141 Wrote:I put in old coolant because I didnt have any more new coolant.
I have flushed the engine about 5 times this summer, driving around with tap water for 10 mins after every flush, it was still not very clean.
You have to understand that the engine I had put in the car last spring had been standing still for over 1,5 years.
The rusty coolant that came out last week has been in the engine for about 4 months. I didnt want to dilute the new coolant too much since it
was meant to be used without adding water. A 5 liter container of the coolant sold at the Shell station costs 17 euro's..ridiculously expensive if you ask me. I need to flush the whole thing again anyway, but I'll do so with cheaper coolant.

About the oil filters, I have also returned one to the dealer before because it didnt state it was for 4age's, but have used them without problems. I believe the original filters for the 4age where longer that the current ones (which are meant for the 4afe & most engines of that generation).

Try reverse flushing the system with a hose gun until all the rust is out and the flushed water runs clear, then refill with your choice of coolant.

I think you're right about the filters - almost all more modern Toyota filters will spin on to any modern Toyota block, but more filter media is always better. I have no doubt you can use the 4AFE filters without problems, but if it says "NOT SUITABLE FOR 4AGE" then that's enough for me.

They're too darn expensive anyway... my dealer wants over £7 + VAT!